A MORPHOLOGICAL STUDY OF POLY（DIVINYLBENZENE-co-ACRYLIC ACID） IN CROSSLINKING PRECIPITATION POLYMERIZATION

Divinylbenzene-80 （DVB-80） and polar monomer acrylic acid （AA） having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2＇-azobis（isobutyronitrile） （AIBN） as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.     

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

计量累积和控制图方案设计的选择

常规控制图已广泛应用于生产,国家标准<计数型累积和图>GB4887-85的实施,使得判断生产“过程”异常具有更高的灵敏度,能更经济地保证产品质量,它是常规控制图的改进与发展.在常规控制图中,为了使控制图能对小偏差有较快的反映,一般用缩小控制界线,如将3σ限改为2σ限,但会导致第一类误判率大大升高.而累积和方法可以通过对方案参数的适当选择使控制图在第一类误判率并不明显升高的情况下对小偏差反映敏感.此外,累积和方法还允许针对各种需要设计出特别适于发现某个偏差,例如1.5σ_e 的     

Structure and microtribological characteristics of laser-arc deposited TiB2 thin film

TiB2 thin film was deposited by laser-arc deposition method on the surface of single crystalline silicon. The morphology, composition, structure and microtribological properties of the film were studied by using XPS, XRD and atomic force/friction force microscope (AFM/FFM). The results show that TiB2 (100) preferred growth on the Si(100)substrate, TiB2(001) preferred growth on the Si(111) substrate. The TiB2 thin film was composed of TiB2 and a small amount of TiO2. The friction coefficient of TiB2 film on substrates Si (100) and Si(111) in microtribological process were 0.087 and 0.073,respectively. TiB2 thin film displayed distinct ability of anti-scratch and wear-resistance.     

熔融织构YBCO的磁性

测量了熔融织构YBCO样品从1.5K到89K的磁化曲线。磁场H平行于c轴时,在1.5K,7K和10K观察到磁通跳跃,在15—83K的温度区间观察到峰值现象。详细分析了磁化曲线和磁临界电流的各向异性。讨论了晶粒之间连接的性质和主要的钉扎中心。 关键词：     

CROSS SECTIONS OF ANTIHYDROGEN FORMATION IN COLLISIONS OF ANTIPROTONS WITH POSITRONIUM

New calculations of the cross sections for antihydrogen formation in collisions of antiprotons with positronium are reported in the present paper. A multiple-scattering expansion method has been used for getting reliable results. Discussion and comparison of the present results are made with other theoretical calculations.     

环形非圆截面等离子体自由界面的磁流体平衡方程解

在有导体壁的条件下,对于各种趋肤的及趋中心分布的等离子体纵向电流,用一种统一的迭代方法,计算了相应的自由界面的磁流体平衡方程解,并讨论了这种方法适用的范围。 关键词：     

40Ca20是否稳定?

本文计算表明通常认为高稳定的双满壳层核⁴⁰Ca₂₀其实并不稳定。⁴⁰Ca₂₀将可能通过双K层电子俘获的机制而转化为⁴⁰Ar₁₈,其半衰期约为1.2×10³³年。 关键词：     

885nmLD高重频侧泵Nd：YAG全固态激光器输出特性研究

对不同反射率和注入电流下885nmLD高重频侧面泵浦Nd：YAG全固态激光器的输出特性进行了实验研究，实验表明1064nm激光脉冲输出能量随注入电流的增加而增大，泵浦频率越高，脉冲输出能量增长越慢。以脉冲侧面泵浦Nd：YAG，在重复频率为60Hz、80Hz，注入电流为130A时，得到了输出透镜的最佳反射率都为73％，输出脉冲能量分别为62.1mJ，47.9mJ，光-光效率分别为13.29%、10.29%。     

近场光学中光纤探针的光强分布

光在亚微米尺度的光纤探针中的传播行为是一个迫切需要了解的重要问题.用时域有限差分法对三维光纤探针的Maxwell方程直接进行求解,获得了光纤探针的光强分布.计算结果表明:光纤探针中的光强分布呈固定的花样图形,花样图形的形状与光的偏振及针尖的结构形状等有关.该结果对深入理解光纤探针的辐射机理非常有益,并对实际制作性能优良的光纤探针具有指导意义.